配線用板バネ
Material:SUS304-H
(Austenitic stainless steel) Plate thickness:t=0.2 Process:Progressive pressing process, Degreasing, bagging
This is a leaf spring produced by progressive press processing.
After degreasing, we are doing bag packing.
In addition to the press, we are able to packaging products in the assembly process.
ガイド金具
Material:SUS304-2B Plate thickness:t=1.5 Process:
Progressive pressing process, barrel polishing
This is a processing example of progressive press and barrel polishing for stainless steel material. This products are symmetrical to each other, enabling one mold to produce both left and right parts. This also saves cost. We have a variety of processing methods for customers’ desired shape.
Tarp pole
Blade spring for carabiner hook
Material:HT-1770 Plate thickness:t=0.6 Process:Pressing, Washing & heat treatment
This blade spring is made of precipitation hardening stainless steel hardened by heat. After progressive pressing and washed, it has heat hardening (aging). It may be hard to process forming shape with SUS631, we have various choices including HT1770
Heater clip
Copling
Manufacturable specification range Material:SUS301(Spring part) Plate thickness:0.1㎜~0.7㎜ Width:5㎜~100㎜
Load (torque): 15g to 35kg (per piece)
This “copling” that operates with constant load and constant torque, regardless of the amount of elongation or deflection.
《Usage》 ①Lifting device:Supports lifting and lowering heavy objects with little force.
②Balancer: Balances (stops) an object at decided position
③Motor:Adopts a winding method on a drum Please contact us for more information.
-Patti PIPE JOINT CLIP - Multicolor
Material:
SUS304CSP-H
(Austenitic stainless steel)【Body】
SUS303(Austenitic stainless steel)【Pin】
Process:
Pressing 【Body】
cutting【Pin】
Powder coating【Body and Pin】
New colors were added to the joint clip of our original product “Patti series”.
This is an example of powder coating applied to the main body of stainless steel.
One-touch mounting leaf spring
Austempering
【 DATA 】
Material:SK-85(Carbon tool steel)
Plate thickness : 0.8mm
Process:Pressing and heat treatment
This is an example of heat treatment
(Austemper treatment)
after one-shot press processing.
By performing heat treatment, the color
will change as shown in the photo,
but springiness will be created.
Rust prevention treatment such as
plating is recommended for post-treatment.
Leaf spring for lighting
Hemming processing
【 DATA 】
Material:SUS304CSP-3/4H
(Austenitic stainless steel)
Plate thickness:0.4mm
Process:Press, barrel polishing
This is an example of a product
that has undergone hemming bending.
The center of the product is bent
in two places. It is an effective
processing method for ensuring product
strength and safety measures.
Tip bending process
【 DATA 】
Material:SK85(Carbon tool steel)
Plate thickness:1.5mm
Process:Press、heat treatment, surface treatment
(trivalent chromate treatment and baking treatment)
This is a product with size of about 23 mm.
This product has convex parts of about 2 mm,
and the convex parts are bent and molded into
twisting shapes. The process is performed at once.
Hold spring
【 DATA 】
Material:HT1770(Precipitation hardening stainless steel)
Plate thickness:0.6mm
Process:Press, aging process(Precipitation hardening)
It is a leaf spring product with
a plate thickness of 0.6 mm and
the length of about 50 mm.
We perform aging treatment (precipitation
hardening treatment) in-house.
Due to the influence of the oxide film
by aging treatment, the surface of the
product turns brown.
If the discolored surface is a problem,
vacuum heat treatment can be applicable
to prevent the color tone.
Processing of brass material, plating
Click flat spring
Seamless slide bracket
【 DATA 】
Material : SUS301CSP-3/4H
(Austenitic stainless steel)
Plate thickness : 0.3mm
Process : Pressing
A leaf spring for lighting equipment.
It is used when installing the LED
light by sliding it, and it can be
easily attached and detached.
We also produce leaf springs for
many lighting fixtures, such as leaf
springs for downlights.